My Cart: 0 item(s)

5mm BARE ELASTEK Wet Hood
Made with 5mm of ELASTEK full-stretch neoprene, this 5mm BARE ELASTEK Wet Hood adds protection, comfort and stretch during your dives. The 3mm Elastek/Glideskin-in trimmable face and neck seal glides over your hair while the Sealtek ring seal system adds max water sealant performance when worn with a drysuit or wetsuit. Other features include: a Seamtek exterior seam which reduces water penetration at the seams, a vent to allow trapped air to escape, sealed seams for durability, a hood neck seal which works great with a wetsuit seal/collar, and a mask strap grip pad on the back of the hood which secures your mask strap.
90 Day Warranty
Technical Specs
Water Temp Rating * | 58 Degrees & Up |
Style | Hood |
Thickness | 5mm |
Neoprene Type | 100% Stretch |
Seam Construction | Sealed & Liquid Taped |
* Water temperature ratings are only a guide and are very subjective. If you are cold, get out of the water and seek warmth.
Bare Standard Size Chart:
Size | Forehead (cm) | Neck (cm) |
---|---|---|
XS | 53 | 33 |
S | 55 | 36 |
M | 57 | 38 |
L | 60 | 41 |
XL | 61 | 43 |
2XL | 62 | 46 |
Size | Forehead (in.) | Neck (in.) |
---|---|---|
XS | 21" | 13" |
S | 21.5" | 14" |
M | 22.5" | 15" |
L | 23.5" | 16" |
XL | 24" | 17" |
2XL | 24.5" | 18" |
Allergy notice: It's rare, but neoprene (wetsuits) and/or the materials used in its construction can cause allergic skin reactions. If allergic, discontinue use and consult a physician.